 |
|
|
How to protect your investment
Click the link below to download an informative booklet from the
National Spa & Pool Institute.
Maintaining Your Spa or Hot Tub
PDF File (approximately 100 KB)
Maintaining Your Spa or Hot Tub
How to protect your investment
A Spa or Hot Tub You Can Enjoy
Enjoying your spa or hot tub depends on knowing that it is well maintained and that the water
is fresh and clean.
The National Spa & Pool Institute (NSPI) has developed this booklet to help you get the most
out of your investment in a spa or hot tub. It includes information on necessary support
equipment, optional accessories and ways to chemically care for the water. Understanding
how to keep the water free from harmful bacteria and algae and the basic steps of other
operations will aid you in maintaining your own spa or hot tub.
The Support System
The support system circulates, filters and heats the hot tub water in your spa. It consists of the
pump, filter, heater and usually an air blower. For most spas and tubs with a capacity of up to
600 gallons, you can purchase a skid pack (a preassembled package) of electrically and
hydraulically matched components. Whether your spa has a skid pack or individual
components, it is useful to understand the basic equipment in your system. Owners' manuals
or instructions from the manufacturer included with your support equipment will assist you in
maintenance procedures.
The Pump
The pump circulates the water through the filter and heater in order to keep it clean and hot.
The pump also powers the hydrojets in your spa or tub. When choosing a pump, important
factors to consider are its capacity relative to the volume of water in your spa or hot tub, the
number of hydrojets, the operating costs and maintenance steps. Generally, a 1 hp pump
motor is sufficient for a 500-700 gallon spa or tub with four hydrojets. Many new energy
saving models, such as two-speed pumps are on the market, and your NSPI professional will be
glad to assist you in your product choice.
The Filter
The filter's job is to keep the water clean by removing solids algae and dirt. There are generally
three types of filters.
Cartridge filters, composed of non-woven polyester, Dacron or treated paper, trap dirt and
residue as the water flows through them. A large majority of spas and tubs use cartridge filters.
Properly maintained cartridges last 1-2 years before replacement is necessary. However, they do
require regular cleaning with a recommended cleaner.
For larger spas and hot tubs, DE (diatomaceous earth) filters are more efficient since they can
carry a heavier dirt load than cartridge filters. Cleaning DE filters is more complicated than
cartridges. When the DE filter needs to be cleaned, it must be backwashed (reverse-flow) or
manually cleaned. A new coating of DE is applied and then the filter is ready for its new cleaning
cycle.
Sand Filters operate similarly to the DE filter and must be cleaned in a similar process, during
which a portion of the water is lost. They offer a slightly less efficient filtration than DE filters.
There are different filter sizes, and the filter flow rate should be compatible with the pump. Your
NSPI dealer or retailer can give you advice on the right model and instructions on how long to
run your filter.
The Heater
Most heaters are either fossil-fueled (natural gas, propane or heating oil) or electric. Your climate
and type of vessel will help determine the most efficient energy source in your area.
In natural gas, propane and oil heaters, air and fuel are pulled in to produce an open flame that
heats copper tubes or another heat transfer system. These heaters are designed to raise the water
temperature quickly and may be more desirable in colder climates.
Electric heaters take longer to heat water but may be adequate for small installations, portable
spas or highly insulated spas. Electric heaters usually run continuously if the spa or tub is used
often.
Electric heaters make good backup systems for solar heaters. To date, the effectiveness of solar
heaters for spas and tubs has yet to be proven. However, with the rapid advances in technology,
solar heating may soon become a feasible alternative. Other alternatives include wood and coal
burning heaters, as well as heat exchangers. An NSPI professional can help you choose the best
energy source for your spa or tub.
Air Blowers and Hydrojets
Air blowers use small electric motors to produce thousands of tiny air bubbles. These motors
must run at 15,000 rpm to 22,000 rpm. Proper sizing and correct installations are the key factors
for years of trouble-free performance. Little direct maintenance is required for the air blowers.
Powered by the pump, hydrojets produce aerated streams of water, creating a massage effect.
Generally, no maintenance is required except a thorough cleaning when you drain your spa or hot
tub.
The Chemicals
The chemistry of spa and hot tub water changes very quickly. Factors that cause this are high
water temperatures, the aeration of the water, the body chemistry of the people using the spa
or hot tub, and the high body to water ratio in the spa or hot tub. For example, five people in
a 500-700 gallon spa or tub equals about 250 people in an average size (25,000 gallon) pool;
the high water temperature also provides a good environment for algae and bacteria to grow.
And because these factors change the water chemistry rapidly, water should be checked
daily. To keep your spa or hot tub's water fresh and clean, you need a water quality test kit. They
are easy to use and will give you the necessary information to keep the water clean and
properly balanced.
The kit should test the following:
The chlorine/bromine disinfectant level;
pH level;
Total alkalinity; and
Calcium hardness.
Spa and hot tub water must have the correct balance of these elements. Unbalanced water can
irritate eyes, corrode the equipment and leave mineral deposits.
Disinfectants
The most widely used chemicals for disinfecting the spa or tub are chlorine and bromine.
Chlorine comes in liquid, tablet or granulated forms while bromine is available in sticks and
tablets or a two-step dry chemical mixture. Both chemicals keep water free of harmful
bacteria and prevent the growth of some algae when maintained at proper levels.
pH Level
Potential hydrogen (pH) is the measure of acidity or alkalinity (basicity) in the water. The
scale runs from 0-14. The recommended pH range is 7.2-7.8. Below this, the water can
corrode a spa or tub finish and support equipment; above this, the pH level can produce
scaling, cloudy water or a clogged filter and reduce the efficiency of the chlorine or to a
lesser degree, bromine.
Soda ash or sodium bicarbonate is used to raise pH level; muriatic acid or sodium bisulfate to
lower it. As with any chemicals, carefully read and follow the directions for proper use of
these substances.
Total Alkalinity
Total alkalinity testing measures the amount of all alkaline salts in the water. Keeping total
alkalinity in the recommended ranges of 90-150 parts per million will help keep your pH level
stable and is one good defense against forming excessive calcium carbonate, a type of alkalinity
that causes scaling, cloudiness and residue to form in your spa or tub.
Water should be tested for total alkalinity every month. The same chemicals used to raise and
lower pH are also used to control total alkalinity.
Calcium Hardness
Testing for water hardness is also important. Calcium is a mineral that affects the water's overall
balance and is no more than 150-300 parts per million. If the calcium level is very high, it may be
time to replace old water with new. If it is too low, add calcium chloride.
Water chemistry is an important part of protecting and enjoying your spa or hot tub. For specific
questions on chemical maintenance, consult a local NSPI member. Many members have
computerized testing labs for your convenience.
Optional Accessories
A skimmer is perhaps the most necessary piece of optional equipment. Outdoors, it skims leaves
and other contaminants off the surface of the water. Indoor, it skims perspiration and body oils
from the water. The device prevents clogged drains and plumbing.
Some owners also supplement their filter with a water purification system. Such systems keep
the water free of microorganisms by using purifying agents, like ozone or ultraviolet energy.
Both these products, along with other purifying agents, are recognized as useful supplements to
chlorine or bromine treatment.
Water purifying systems leave no residue in the water, remove most odors and may even reduce
the amounts of disinfectant required for proper water treatment.
However, most experts caution owners to use water purification systems only in addition to
regular chemical purification. Chemical treatment of the water helps to kill microorganisms in
still water or before they are pumped through the purifier.
Spa or hot tub covers can be made out of fiberglass, canvas, plastic or wood and are useful
because:
they keep the water free of leaves and other objects when not in use;
they can act as a safety device to keep children out;
they keep heat in, thereby reducing energy costs;
they reduce the evaporation of water and chemicals; and
they can be used as a winterizing cover.
If you own an indoor spa or tub, you can enjoy year-round hot soaks. Owners of outdoor models
can soak year-round as well with some additional steps. A freeze-protection kit for your spa or
tub includes:
insulation for the unit, pipes and support equipment;
insulated cover to retain heat; and
a device to protect your spa or tub from freezing that is monitored by a thermostat or time
clock. If you close your spa or tub, carefully read the directions that come with your model and
consult your NSPI professional on the proper steps.
With additional accessories such as inflatable pillows, trays, juice bars, toys, games and back
scrubbers, you can make your spa or hot tub an indoor or outdoor recreational center.
Special Care for Your Hot Tub
During the first few months, water will soak some chemicals from certain types of wooden
hot tubs. This calls for draining the tub frequently or using a cleaning agent regularly during
the break-in period.
In addition, periodic draining and light scrubbing of the wood will maintain its appearance.
However, once it is in use, it is best not to leave a wooden hot tub empty for more than two
days. The wood can shrink, and when you fill it again, it may leak until the wood swells.
Special Care for Your Spa
Both acrylic and gelcoat spas should be periodically drained and wiped with a sponge.
Deposits can be removed with a common nonabrasive cleaner. In addition to general
cleaning, proper chemical maintenance will prolong the spa's shine and finish.
A concrete or plaster spa also requires consistent maintenance and can be cleaned with a
diluted muriatic acid solution.
If a gelcoat spa loses its shiny gloss, there are a number of coatings or sealant to freshen the
surface. Acrylic spas maintain their luster indefinitely, and using a special kit available from
the manufacturer or dealer can repair surface scratches.
If you have any questions, consult your NSPI dealer or builder for proper care procedures.
Some Basic Maintenance Ideas
Your spa or hot tub will benefit from a regular schedule of maintenance. Here is what the
experts recommend.
Test your water daily for its pH level and chlorine or bromine. Test for total alkalinity
and calcium levels once a month.
Use your cover consistently to prevent heat loss.
Clean your filter on the average once a month.
Check the leaf strainer basket at least every other week to remove debris.
Drain and refill the tub or spa with fresh water about every 3 months; clean the unit
thoroughly at this time. Heavy usage may require cleaning more often; the tests made
will help determine the time.
Periodically check pipe joints and seals in the support equipment for leaks.
Inspect the heater annually for scale, mineral deposits or corrosion.
Apply exterior oil to hot tubs 2-4 times a year to preserve the finish.
Check the metal bands or hoops of your hot tub for signs of rust or corrosion.
If you have a fiberglass spa, add a coat of special wax about twice a year to restore luster.
NSP1 Meets Your High Standards
When you are choosing a builder, retailer or service company for your spa or hot tub, remember to
look for the logo of the National Spa & Pool Institute. It tells you that this company is a member of a
national trade association dedicated to high standards. NSPI members share a commitment to public
health and safety in the installation, maintenance and operation of pools, spas and hot tubs. They also
share a commitment to establish voluntary uniform design and construction standards. NSPI members
are leaders in their field and experts in new products and related services. They'll help you make the
most of your investment in a spa or hot tub.
For information on this publication, write:
National Spa & Pool Institute
2111 Eisenhower Avenue
Alexandria, Virginia 22314
Or call:
1 (800) 323-3996